Heating - Ventilation and Air Conditioning (HVAC)

SolarVenti has produced solar air collectors for different purposes for more than 25 years. In 2015 the number of sold collectors is near to 70.000 units.

The air collectors have a unique way of heating fresh air – running for free by solar energy. The air collectors heats and dehumidificates houses, basements or other buildings having humidity problems.

When heating the air you lower the relative humidity, and this may be used for drying and making a better indoor climate.  The small systems even run for free using a solar driven fan.

Digital Display which allows for programming the exact water temperature;
Thermostatic - Exact gas consumption in relation to the water flow and the programmed temperature;
It maintains the temperature without large variations of pressure in the local water network;
Multimples security systems;
Maximum gas savings;
Progressive automatic start;
Without pilot flame - Savings equivalent to 7 * 45 Kg. per year;
Natural gas operation;
Forced shot - Expulsion of 100% burned gases;

VENCO Heat Recovery Ventilation Units (VHR) are designed for saving energy and also improving indoor air quality. VHR units provide ventilation for several applications(residential, commercial and industrial areas) by using aluminum plate type exchangers, recovering heat from air to air. The heat is effectively transferred from warm to cold air by the exchangers with high conductivity, efficiency and performance.

Cooling only & cooling and heating type;
Changeable decoration strip of panel;
Energy saving;
Inner grooved copper pipe;
Low noise.

Capacity: 9000BTU~24000BTU;
ON/OFF & Inverter type;
R22&R410A.

Air source heat pump (for DHW and/or house heating) is designed special for domestic hot water and house heating system in the market where lowest air temperature is above -10℃.

Application：

Air source heat pump (for DHW and/or house heating) is designed for domestic hot water and/or house heating, with 3-way valve, heat pump controller can change the circulating direction of water between hot water tank and house heating system, and hot water is priority.

Household Split Heat Pump
1.Round or square type water tank
2.Wired controller
3.Working condition:-7℃ to 43℃
4.Max outlet water temperature: 60℃
5.Mitsubishi Rotorary type compressor
6.R410A refrigerant
7.Economic working mode and automatic working mode can be changed

The Comfort CT300 is for anyone who wants ventilation with highly efficient heat recovery and comfort heating.

The system extracts hot, humid air from e.g. the kitchen, bathroom and utility room, and at the same time removes dust particles, moisture and odours from the home. Furthermore, the energy from the extract air is used to heat the incoming air.

The Alfa Laval CB range of brazed plate heat exchangers feature efficient heat transfer.

Heat Pump is a device, which extracts heat from air and transfer heat for heating water. Main components of heat pump are:
Fan - Ambient air flows through Evaporator coil and is sucked by axial fan. Evaporator coil is protected buy filter against dust. Fan is with protection grill. Outgoing air is cooler by 3 to 50C than incoming ambient air.
Evaporator coil- It is made of copper tubes with aluminium fins. Refrigerant in liquid form flows through this coil. Refrigerant gets heat from air to be converted to gas form.

By utilizing environmentally safe, non-ozone-depleting R-410A refrigerant, the ecoY2® sets the industry standard in its class for performance, efficiency and quality. Additional features include X-13 5-speed ECM blower motors, optional domestic hot water generators, and microprocessor based controls with on-board diagnostics for maximum efficiency. Several decades of research, engineering advancements and manufacturing experience have come together to create the ecoY2® Series.